Startup and Walkaround Video
Undercarriage Photos
I don’t have access to a lift, so these are the best pictures I could take with the car on jack stands.
Click on any image to enter full-screen slideshow mode.
Engine Photos
Click on any image to enter full-screen slideshow mode.
Trunk and Tools Photos
Click on any image to enter full-screen slideshow mode.
Interior Photos
Click on any image to enter full-screen slideshow mode.
Exterior Photos
Click on any image to enter full-screen slideshow mode.
Replace Trunk Fasteners
There were a couple of cargo net fasteners and trunk lining fasteners missing from the trunk. I sourced the missing items from ECS.
Complete Tool Kit
My tool kit was missing some items. I had already replaced the spark plug wrench. I was missing a small red Heyco screwdriver, which I was able to source from a mye28.com member. Ivo was also selling reproduction blue polishing cloths, which I was able to purchase on eBay.
Perform Compression Test
I purchased the tool to perform a compression test. The procedure is pretty simple, especially with the 12v trigger attached to pins 11 and 14. I removed the main relay, fuel pump relay and lead to the ignition coil. I cranked the engine until the compression was stable.
These are the readings I measured:
Cylinder #1: 160 psi
Cylinder #2: 182 psi
Cylinder #3: 177 psi
Cylinder #4: 155 psi
Cylinder #5: 176 psi
Cylinder #6: 174 psi