Perform Compression Test

I purchased the tool to perform a compression test. The procedure is pretty simple, especially with the 12v trigger attached to pins 11 and 14. I removed the main relay, fuel pump relay and lead to the ignition coil. I cranked the engine until the compression was stable.

These are the readings I measured:

Cylinder #1: 160 psi

Cylinder #2: 182 psi

Cylinder #3: 177 psi

Cylinder #4: 155 psi

Cylinder #5: 176 psi

Cylinder #6: 174 psi

Leave a Reply

Your email address will not be published. Required fields are marked *